Loader Attachments
Cutting Edges
Replacement Cutting Edges and End Pieces
- High carbon, single bevel steel cutting edge
- Pre-cut lengths in many sizes
- Welding the end pieces create a strong, straight corner
- You control the spacing of the end pieces to ensure a proper fit
- Quick install
| Pre-cut Weld-on Cutting Edge A | |||
| Size | Type | Weight | Order Code |
| 1/2" x 3" x 61-3/8" | Weld-on Cutting Edge | 23 lbs. | 000-190-007 |
| 1/2" x 3" x 67-3/8" | Weld-on Cutting Edge | 25 lbs. | 000-190-008 |
| 1/2" x 3" x 73-3/8" | Weld-on Cutting Edge | 28 lbs. | 000-190-009 |
| 1/2" x 4" x 61-3/8" | Weld-on Cutting Edge | 31 lbs. | 000-190-013 |
| 1/2" x 4" x 67-3/8" | Weld-on Cutting Edge | 34 lbs. | 000-190-014 |
| 1/2" x 4" x 73-3/8" | Weld-on Cutting Edge | 37 lbs. | 000-190-015 |
| 3/4" x 4" x 61-7/8" | Weld-on Cutting Edge | 44 lbs. | 000-190-023 |
| 3/4" x 4" x 67-7/8" | Weld-on Cutting Edge | 49 lbs. | 000-190-024 |
| 3/4" x 4" x 73-7/8" | Weld-on Cutting Edge | 53 lbs. | 000-190-025 |
| 3/4" x 4" x 79-7/8" | Weld-on Cutting Edge | 57 lbs. | 000-190-026 |
| 3/4" x 4" x 85-7/8" | Weld-on Cutting Edge | 61 lbs. | 000-190-027 |
| 3/4" x 6" x 61-7/8" | Weld-on Cutting Edge | 70 lbs. | 000-190-031 |
| 3/4" x 6" x 67-7/8" | Weld-on Cutting Edge | 77 lbs. | 000-190-032 |
| 3/4" x 6" x 73-7/8" | Weld-on Cutting Edge | 84 lbs. | 000-190-033 |
| 3/4" x 6" x 85-7/8" | Weld-on Cutting Edge | 98 lbs. | 000-190-036 |
| 3/4" x 6" x 97-7/8" | Weld-on Cutting Edge | 112 lbs. | 000-190-038 |
| 3/4" x 6" x 103-7/8" | Weld-on Cutting Edge | 119 lbs. | 000-190-039 |
| 3/4" x 6" x 121-7/8" | Weld-on Cutting Edge | 141 lbs. | 000-190-193 |
| Weld-on End Pieces B | ||
| Size | Type | Order Code |
| 1/2" x 4" | End Piece Set | 000-190-095 |
| 3/4" x 4" | End Piece Set | 000-190-097 |
| 3/4" x 6" | End Piece Set | 000-190-098 |
Bolt-on Reversible Cutting Edges
- Greatly reduces the time required to replace the bucket cutting edge
- Double-bevel flat edge can be reversed for twice the wear
- High-carbon steel incorporates the long-wearing characteristics of weld-on cutting edge
- Deep countersunk holes keep bolt heads from wearing
| Weld-on Base w/holes A | |||
| Size | Type | Weight | Order Code |
| 1/2" x 4" x 61-3/8" | Weld-on base w/holes | 31 lbs. | 000-190-042 |
| 1/2" x 4" x 67-3/8" | Weld-on base w/holes | 34 lbs. | 000-190-043 |
| 1/2" x 4" x 73-3/8" | Weld-on base w/holes | 37 lbs. | 000-190-044 |
| 3/4" x 6" x 61-3/8" | Weld-on base w/holes | 48 lbs. | 000-190-061 |
| 3/4" x 6" x 67-3/8" | Weld-on base w/holes | 53 lbs. | 000-190-062 |
| 3/4" x 6" x 73-3/8" | Weld-on base w/holes | 58 lbs. | 000-190-064 |
| 3/4" x 6" x 79-7/8" | Weld-on base w/holes | 76 lbs. | 000-190-065 |
| 3/4" x 6" x 85-7/8" | Weld-on base w/holes | 84 lbs. | 000-190-066 |
| 3/4" x 6" x 91-7/8" | Weld-on base w/holes | 90 lbs. | 000-190-067 |
| 3/4" x 6" x 97-7/8" | Weld-on base w/holes | 111 lbs. | 000-190-068 |
| 3/4" x 6" x 103-7/8" | Weld-on base w/holes | 119 lbs. | 000-190-069 |
| NOTE: The bucket must be equipped with a base, weld-on cutting edge with 11/16" holes on 6" centers. The bolt-on edge is fastened to the base with 5/8" plow bolts. | |||
| Bolt-on Edge B | |||
| Size | Type | Weight | Order Code |
| 1/2" x 6" x 61-3/8" | Bolt-on edge w/holes | 48 lbs. | 000-190-073 |
| 1/2" x 6" x 67-3/8" | Bolt-on edge w/holes | 53 lbs. | 000-190-074 |
| 1/2" x 6" x 73-3/8" | Bolt-on edge w/holes | 58 lbs. | 000-190-076 |
| 5/8" x 6" x 61-7/8" | Bolt-on edge w/holes | 59 lbs. | 000-190-083 |
| 5/8" x 6" x 67-7/8" | Bolt-on edge w/holes | 65 lbs. | 000-190-084 |
| 5/8" x 6" x 73-7/8" | Bolt-on edge w/holes | 71 lbs. | 000-190-085 |
| 5/8" x 6" x 79-7/8" | Bolt-on edge w/holes | 76 lbs. | 000-190-086 |
| 5/8" x 6" x 85-7/8" | Bolt-on edge w/holes | 82 lbs. | 000-190-087 |
| 5/8" x 6" x 91-7/8" | Bolt-on edge w/holes | 88 lbs. | 000-190-088 |
| 5/8" x 6" x 97-7/8" | Bolt-on edge w/holes | 93 lbs. | 000-190-089 |
| 5/8" x 6" x 103-7/8" | Bolt-on edge w/holes | 99 lbs. | 000-190-090 |
| 3/4" x 8" x 73-7/8" | Bolt-on edge w/holes | 105 lbs. | 000-190-156 |
| 3/4" x 8" x 85-7/8" | Bolt-on edge w/holes | 123 lbs. | 000-190-157 |
| 3/4" x 8" x 97-7/8" | Bolt-on edge w/holes | 140 lbs. | 000-190-124 |
| 3/4" x 8" x 110-7/8" | Bolt-on edge w/holes | 157 lbs. | 000-190-154 |
| 5/8" x 1-1/2" | Grade 8 Plow Bolt with Nut | - | 000-150-255 |
| 5/8" x 1-3/4" | Grade 8 Plow Bolt with Nut | - | 000-150-260 |
| 5/8" x 2" | Grade 8 Plow Bolt with Nut | - | 000-150-261 |
| POLY BOLT-ON EDGE | |||
| Size | Type | Weight | Order Code |
| 1" x 5" x 49" | Bolt-on Poly Edge & Hardware for 48” Kubota Buckets on LA344, LA344S, and LA340 loaders | 9 lbs. | 000-190-197 |
| POLY DOUBLE-BEVEL EDGE w/o HOLES |
|||
| Size | Type | Weight | Order Code |
| 1" x 6" x 74" | Double-bevel Poly Edge, Blank no holes | 15 lbs. | 000-190-198 |
| 1-1/2" x 8" x 86" | Double-bevel Poly Edge, Blank no holes | 34 lbs. | 000-190-199 |
| 1-1/2" x 8" x 98" | Double-bevel Poly Edge, Blank no holes | 38 lbs. | 000-190-200 |